Product description
StoneColor® is specially developed for surface treatment of exterior pavements on absorbent and porous surfaces such as tiles and paving stones. StoneColor® can be applied to desired surfaces after they are thoroughly cleaned of algae, grease, dirt, dust etc. It is recommended to clean with StoneCleaner® and a high-pressure cleaner or with a brush depending on what type of surface is to be treated and how old and soiled it is. Once the surface has dried, StoneColor® can be applied.
Application
It does not take long to restore a patio with StoneColor: First, the tiles need to be cleaned with a product specially intended for stone, such as StoneCleaner. The product can easily be applied with a soft brush. Next, any dirt must be removed either with a hard scrubbing brush or a high-pressure cleaner. Once the tiles have dried, they are ready to be painted with StoneColor either with spray, a paint roller or brush.
NOTE: Always apply a test coat to check the compatibility of the product and the surface. Must be stirred before and during use.
Technical data
Product: StoneColor®
Use: Surface treatment, protection and impregnation of exterior absorbent mineral paving stone and tiles
Chemical spec.: Based on nano-technology using Crosslinking Resins and UV-stable pigments.
Base: Water-based. Use undiluted, or thinned as needed with max. 10% water.
Properties: Strong adherence, incredibly hard-wearing, withstands oil, water, chemicals. UV-stable.
Dry time: Approx. 60 min. at 20 deg. C and 60% RH.
Application: Paint brush, paint roller or spray.
Coverage: 1 L is enough for approx. 3-5 m2 depending on the surface condition and application method.
Cleaning: Application tools should be thoroughly cleaned under regular lukewarm water.
Storage: Dry and frost free place, out of the reach of children.